· The CMGPS 588 synchronization unit is an antenna-integrated GPS controlled time reference. It is optimized for outdoor usage and works as a PTP grandmaster clock according to IEEE 1588-2008 / IEEE C37.238-2011 Power Profile.
· The CMGPS 588 can be used to synchronize the time base of an OMICRON CMC or DANEO 400 test set:
Control one OMICRON test set at a predetermined point in time (triggering the starting point of a test process) or
Synchronize the starting point of a test process of two or more OMICRON test sets or
Accurately time-stamp data captured by an OMICRON test set
· CMGPS 588 is automatically ready for operation shortly after providing power supply via Power over Ethernet (PoE). The distance between the CMGPS 588 and the test set can be extended up to 95 m / 312 ft by using extension cables (one 15 m/49 ft standard Ethernet cable plus two 40 m/131 ft rugged Ethernet cable reels).
Compatible test sets:
CMC 356, CMC 256plus, CMC 430 and CMC 353 with NET-1B, NET-1C or NET-2
The PME-500-TR break timer has a built-in battery that supplies power for 10 hours, eliminating the need for a generator in a shut-down substation, and provides clean, pure DC current for accurate four-wire contact resistance measurement of the three main contacts in a single test.
· Easy to use…comes with all test leads ready for testing
· Contains a built-in printer
· Independent of PC
· Reducing the time involved in making these tests and to optimize them
· Improving the quality and accuracy of the results
The CTA-306 contact timing analyzer has been designed to provide timing results for electrically operated open and / or close devices (circuit breakers). Up to six poles can be analyzed (Inputs C1 to 6). The equipment allows for AC and / or DC operation, for close and/or open operation, on common control voltages. Using microprocessor control and solid state relays, the test unit maintains a high level of accuracy and shows results in milliseconds or cycles (60 Hz).
SPECIFICATIONS Unit Power 0.8 Amps @ 120 VAC (fused 10 Amps) 10 Amp 120 VAC output (for user use and fused with unit) 50A Full wave Bridge – AC to DC operation Product Certification Intertek – Special Inspection Approval
Accuracy - +/- 0.05 mS
Outputs 30 Amp CLOSE Output (AC or DC) 30 Amp OPEN Output (AC or DC) Inputs Six 12 VDC Inputs optically coupled and fused at 100mA
Hand-held Dewpoint Meter DM70 for spot-checking applications and field calibration offers accurate and fast measurement for industrial dew point applications, such as compressed air, metal treatment as well as food and plastics drying.
· Fast response time enhanced by sensor purge function ensures quick and accurate data.
· The sensor withstands condensation and fully recovers from getting wet.
· Easy-to-use user interface, a clear graphical LCD display, and data-logging capability.
External GPS Antenna, with magnet foot – 5 m Cable
Uses Topcom IR-to-USB interface
Fitted with Bluetooth for wireless data transfer
Comes in Metal case with Magnets, GPS antenna cable grommet 03-5mm, IR-to-USB interface
Compatible with PC Win-7, Win-8, Win-10
This registration unit is equipped with: integrated GPS receiver, at your choice with internal GPS antenna or socket for connecting external GPS antenna. Measures and records acceleration, the duration of the acceleration, temperature, humidity and angle with built-in sensors.
HMT-1 REALWEAR HEADSET (WEARABLE COMPUTER)
Remote Mentor solutions on the RealWear HMT-1 enable workers in the field to get assistance from experienced technicians ("mentors") via a video call.
The HMT-1, with its high-performance HD camera and class leading noise cancelling microphones enables mentors located anywhere in the world to see what the worker is seeing, hear them clearly and coach them in real-time.
Salisbury’s Self-Testing Voltage Detectors allow testing to be continuous and automatic. An intermittent flash and beep confirms the detector is functioning properly. Self-Testing Voltage Detectors are used to verify live or de-energized conductors. These testers may be used with rubber insulating gloves or hot sticks using the splined universal end fitting. Testers indicate the presence of voltage with an extra bright LED light and a distinctive audible signal. It is recommended that the tester be moved closer to the conductor until a warning is indicated, or it touches the conductor, apparatus, or elbow test point. Each tester requires three “C” batteries
SMC DIGITAL PHASE SCOPE PME-20-PH C/W 35,000VAC HOT STICKS
The PME-20-PH is an instrument designed mainly as a phase angle meter, although other parameters, such as Frequency and Power Factor can be measured. The instrument has an analogic scale that enables it to be used as a synchroscope. • Voltage input: 0.2 to 600 V RMS direct. Current input: 0.1 to 25 A RMS direct. • Selected Measurement Modes: Phase Angle displayed as +/-180° • Phase Angle displayed as 0-360° Frequency: 40 to 500 Hz • Power Factor: 0 to +/-1, indicates phase angle quadrant. • Use as a Synchro-scope. Battery Powered. • Reduced size and weight.
The cbLift™ raises and lowers low- to medium-voltage circuit breakers from the rails of the switchgear. But what makes cbLift™ unique is the built-in workstation and turntable, allowing you to service a breaker while on the lift – never having to leave the device. This means reduced injuries with no man-handling of heavy breakers.
Lifting heavy circuit breakers from their rails can be dangerous to personnel and equipment. cbLift™ allows you to inspect, test, or repair breakers right from the lift. cbLift™ allows for easy one-man installation with hydraulic lifting, never lifting the breaker yourself.
WEIGHT = 175 lbs LIFT CAPACITY = 800 Lbs RANGE 5” – 60” 36” x 36” FOOTPRINT
Extremely Stable – Removable turntable – Locking wheels and outriggers – Very manuverable